Sunday 12 May 2013

CE2208 - Computer Aided Building Drawing 3rd Sem - Civil Engineering | Anna University

B.E 3rd Semester Civil Engineering Lab Syllabus of Anna University: 

                      Students those who are all studying civil engineering 3rd semester and undergoing semester exams must need of syllabus copy to know their studying areas and details. Syllabus copy have an important role in studying for examinations. Below i have listed the civil engineering 3 rd semester syllabus of CE2208 - Computer Aided Building Drawing Laboratory. Go though the syllabus and study well for your exams by choosing the correct text books.


CE2208 COMPUTER AIDED BUILDING DRAWING

OBJECTIVE:

At the end of this course the student should be able to draft on computer building drawings (Plan,
Elevation and sectional views) in accordance with development and control rules satisfying
Orientation and functional requirements for the following:
1. Buildings with load bearing walls (Flat and pitched roof) –
Including details of doors and windows 15
2. RCC framed structures 15
3. Industrial buildings – North light roof structures – Trusses 15
4. Perspective view of one and two storey buildings 15


TEXT BOOKS
1. Civil Engg. Drawing & House Planning – Varma B.P., Khanna publishers, Delhi
2. Building drawing & detailing – Balagopal & T.S. Prabhu, Spades Publishers, Calicut.

REFERENCES
1. Building drawing – Shah.M.G., Tata McGraw-Hill,1992
2. Building planning & Drawing –Kumaraswamy N., Kameswara Rao A., Charotar
Publishing
3. Shah, Kale and Patki, Building Drawing with integrated approach to built environment,
Tata McGraw-Hill.
Examination Guideline
30% of the end semester examination paper shall deal with planning, while the rest 70% shall be based on the drafting skill.

LIST OF EQUIPMENTS:
(For a batch of 30 students)
Sl. No. Description of Equipments Quantity
1. Computer system of Pentium IV or Equivalent 1 for each student
2. Licensed version of any reputed Analysis,
Design & Drafting software
1 copy for a set of 3 students

Just copy and paste on a notepad, take print out and have it with you always to study better. Thanks

CE2207 - Survey Practical - I Lab Syllabus 3rd Sem - Civil Engineering | Anna University

Anna University 3rd semester Survey Lab Syllabus for Civil Engineering Students:

                        CE2207 - Survey Practical - 1 is one of the practical paper for B.E 3rd semester Civil Engineering students. Below you can get our syllabus copy in detail . Use of syllabus copy is very important to all This will help you all to plan your studies in advance. So go through the syllabus and copy to your word bad or notepad and have print out copy with you to make your studies better.


CE2207 SURVEY PRACTICAL I 

OBJECTIVE

At the end of the course the student will posses knowledge about Survey field techniques
1. Study of chains and its accessories
2. Aligning, Ranging and Chaining
3. Chain Traversing
4. Compass Traversing
5. Plane table surveying: Radiation
6. Plane table surveying: Intersection
7. Plane table surveying: Travelling
8. Plane table surveying: Resection – Three point problem
9. Plane table surveying: Resection – Two point problem
10. Study of levels and leveling staff
11. Fly leveling using Dumpy level
12. Fly leveling using tilting level
13. Check leveling
14. LS and CS
15. Contouring
16. Study of Theodolite


SURVEY PRACTICAL I & SURVEY PRACTICAL II

LIST OF EQUIPMENT
(For a batch of 30 students)
Sl. No. Description of Equipments Quantity
1. Total Station  3 No’s
2. Theodolites      At least 1 for every 10 students
3. Dumpy level      At least 1 for every 10 students
4. Plain table At least 1 for every 10 students
5. Pocket stereoscope 1
6. Ranging rods  1 for a set of 5 students
7. Levelling staff
8. Cross staff
9. Chains
10. Tapes
11. Arrows


Go through the syllabus and make your studies easier and better.